I would like to start this by saying that I’ve had lots of experience and training when it comes to using the tools needed for trimming and cutting trees. I know what I’m doing so I know how to do it safely. I would never encourage any of you to cut your trees if you don’t have experience as this could lead to serious injury. Take a look on stamfordtreeservices.com if you’re wanting your trees serviced professionally.
Anyway, I’m starting to get down to the last few trees in the orchard (and I may not be able to get them because the sap is starting to run). When the pruning is light, I can get through all 33 of my trees in a couple of days-assuming I can work all day at it and the weather isn’t too cold (or hot). This year it’s taking a bit longer because I’ve had a number of personal issues that have kept me from working full days outside. Even so, I normally don’t get the trees finished until the end of March or beginning of April, so I’m getting done early this year. As mentioned in Trimming the Trees (Part 1), when to prune is a matter of much debate. Some people prune their trees in the fall, some in mid-winter, and some a bit earlier in the spring than I do.
Part of pruning your trees is knowing how to prune that particular tree. For example, I visualize an umbrella shape when trimming apples. In fact, a lot of home growers use this particular shape. An umbrella shape is quite strong and tends to ensure a good harvest. In addition, the umbrella shape is easier to pick. Commercial orchards use a variety of other shapes, some of which work best when the pickers are working from the back of flatbed trucks. Some people tie down water sprouts to obtain the umbrella shape, which tends to stress the tree. I prefer to look for branches that are already heading in the right direction and trim off everything else. Water sprouts are branches that grow straight up from joints in the tree. You need to trim these off as they’ll never produce any fruit.
Our pears and cherries are dwarf trees with a strong central leader. When pruning these trees, I visualize a flame shape. The tree should be topped to keep it from growing too high. Yes, you’ll get fruit all the way up, but the problem is figuring out a way to pick it without damaging the tree. Keeping the tree down to between 14 feet and 16 feet high ensures that you can reach all of the fruit in fall. Water sprouts aren’t a problem with the central leader trimming technique. What you want to do is ensure that none of the branches are crossing and that the limbs aren’t overextended. Cherry trees require a significantly lighter hand than pears do. In fact, pear trees are quite forgiving when you over-prune them. Cherry trees are also stronger than pear trees. If you don’t trim your pear trees heavily enough, the limbs have a habit of breaking off at the crotch, especially in high winds.
Plum trees are just plain messy looking. I don’t think I’ve ever seen one that I would consider a beautifully shaped tree (at least, not one that produces fruit). Plum trees are normally trimmed using the open center approach. This technique relies on three or four branches attached to a main trunk. You don’t trim the tree heavily. In fact, unless there is some sort of problem with crossing branches or water sprouts, you don’t trim at all. Of all the trees, prunes are the least forgiving when it comes to over-pruning. They grow slowly, so taking off too much this year means paying for several years. Two of my prunes actually look more like a bushes than trees and I trim them quite carefully to keep them that way.
Some trees produce well every other year. My apples are this way. They’ll produce quite heavily one year and then take a vacation the next. With this in mind, I establish a pattern of trimming heavier on off years and lighter on production years. This way, I maximize the amount of fruit I get from the tree and still maintain it properly.
I haven’t personally tried my hand at growing anything more than apples, pears, plums, and cherries. However, the basic techniques I use likely apply to most fruit tree types. My next project is to try my hand at growing some nut trees. Hickory nuts and butternuts grow well in this area, so I’ll try them first. Unfortunately, we can’t grow English walnuts or you can be sure I’d be planting them. We can grow black walnuts, which work well in baked goods. The only technique I haven’t tried so far is the trellis technique of pruning for fruit trees. I’d love to hear from anyone who has tried it at [email protected]. In my last post (for now) on this topic, I plan to discuss some of the things you should look at on the tree while pruning.
